복권 카드를 찢는 생산 과정에서 찢어진 필름 층 처리
The process of tearing off the film layer in the production process of tearing오픈 복권 카드일반적으로 다음 단계가 포함됩니다.
1. Design: Firstly, according to the requirements and design requirements of the lottery card, create corresponding design drawings.
2. Printing: Print the designed pattern on the surface of the card, usually using a printing machine for printing.
3. Film covering: To protect the printed pattern, a transparent film can be covered on the surface of the card. This can be achieved through methods such as hot compress lamination, cold compress lamination, or coating lamination.
4. Coating film layer: Applying a special film material to the card is a key step in tearing off the film layer. Coating a thin film layer usually uses special coating equipment to evenly coat the thin film material onto the surface of the card.
5. Drying: Dry the coated film layer to ensure that it can firmly adhere to the surface of the card.
6. Cutting and Forming: According to design requirements, cut the card into corresponding shapes and sizes, and perform shaping.
7. Packaging: Finally, pack and box the produced lottery cards for shipment.
This is a general production process for tearing open lottery cards, and the specific processing details may vary depending on the manufacturer and product.
1. Design: Firstly, according to the requirements and design requirements of the lottery card, create corresponding design drawings.
2. Printing: Print the designed pattern on the surface of the card, usually using a printing machine for printing.
3. Film covering: To protect the printed pattern, a transparent film can be covered on the surface of the card. This can be achieved through methods such as hot compress lamination, cold compress lamination, or coating lamination.
4. Coating film layer: Applying a special film material to the card is a key step in tearing off the film layer. Coating a thin film layer usually uses special coating equipment to evenly coat the thin film material onto the surface of the card.
5. Drying: Dry the coated film layer to ensure that it can firmly adhere to the surface of the card.
6. Cutting and Forming: According to design requirements, cut the card into corresponding shapes and sizes, and perform shaping.
7. Packaging: Finally, pack and box the produced lottery cards for shipment.
This is a general production process for tearing open lottery cards, and the specific processing details may vary depending on the manufacturer and product.
